Cabinet Pulls

Measure between the centres of the two fixing holes to find your hole centres. Check the overall length separately.
Add a warm, elegant accent to your kitchen, bathroom, or furniture with this polished brass cabinet pull. Its sleek cylindrical bar, reflective gold-tone finish, and decorative ring details complement classic, transitional, and luxury-inspired interiors.
For two-hole pulls, measure from the center of one screw hole to the center of the other before ordering.
| Center-to-Center | Overall Length | Best For |
|---|---|---|
| Single Hole | 1.18 in. (30 mm) | Small drawers and side cabinets |
| 3.78 in. (96 mm) | 5.04 in. (128 mm) | Wall cabinets and slim drawers |
| 5.04 in. (128 mm) | 6.30 in. (160 mm) | Standard kitchen drawers |
| 6.30 in. (160 mm) | 7.48 in. (190 mm) | Base cabinets and closet doors |
| 10.08 in. (256 mm) | 11.26 in. (286 mm) | Tall cabinet and closet doors |
Details: Zinc alloy · Polished brass finish · 0.47 in. (12 mm) wide · 1.38 in. (35 mm) projection · M4 mounting screws
Please note: Sold individually for indoor use. Wipe clean with a soft, damp cloth and avoid abrasive cleaning products. Screw length requirements may vary depending on cabinet thickness.
Measuring cabinet hardware is simple. Use this guide to find the right fit for your space.

Measure between the centres of the two fixing holes to find your hole centres. Check the overall length separately.

Check the diameter and how far the knob projects from the cabinet surface.
Use these recommendations for a balanced and functional look throughout your space.

Center pulls horizontally on the drawer front for a clean, balanced look.

Place knobs or pulls near the lower opening corner, keeping placement consistent.

Place knobs or pulls near the upper opening corner, keeping placement consistent.
Everything you need to know about choosing, installing, and caring for cabinet hardware.
If you're replacing existing pulls, measure the distance between the centres of the two screw holes and choose the same hole-centre size. For new cabinets, consider the width of your drawers and doors, your preferred style, and the overall length listed on the product page.
Hole Centers is the distance between the centres of the two mounting holes. Overall Length is the full length of the pull from end to end. Two pulls with the same hole-centre size can have different overall lengths.
Often, yes. If the new pull has the same hole-centre spacing as your existing holes, you may be able to reuse them. Check the mounting requirements and ensure the new hardware fits your cabinet before ordering.
For upper cabinet doors, hardware is commonly placed near the lower opening corner. For lower cabinet doors, it is usually placed near the upper opening corner. Keep the placement consistent across matching doors.
Drawer pulls are commonly centred horizontally. For taller drawers, vertical placement can vary depending on the drawer style and proportions. Measure and mark the position before drilling.
Included screws and their sizes may vary by product. Please check the product description for the supplied fixings. If you're unsure whether the screws will suit your cabinet thickness, contact us before ordering.
LookiDecor offers cabinet hardware in a range of styles and finishes. Materials and finish options vary by product, so please check the individual product description and selected variant for exact details.
Wipe your hardware with a soft, slightly damp cloth and dry it thoroughly. Avoid abrasive pads, harsh cleaners and prolonged exposure to moisture. Always follow any product-specific care instructions.